May 14, 2017, 1:33 pm
I got a Wavetek 395 arbitrary waveform generator (AWG) last year. Unlike my other equipment (such as HP 8566B, HP 5350B, HP 8642B and Racal Dana 1992) which all came with high stability ovenized crystal oscillators, the Wavetek 395 only comes with a 100ppm crystal. While the stock timebase is perfectly fine for all but the most serious measurements, I decided to upgrade it to an oven controlled crystal oscillator (OCXO) as I happen to have a Vectron CO-717B58N lying around. Continue reading ‘Wavetek 395 Timebase Upgrade’ »
June 26, 2016, 8:15 pm
I picked up a Wavetek 395 arbitrary waveform generator on eBay a few weeks ago. Wavetek 395 is a single channel, 12-bit resolution DDS AWG with a maximum clock frequency of 100 MHz. While the operation manual is readily available, I could not find the service manual anywhere. So I was curious to see the construction inside. In this post, I will show you some of the teardown pictures. If you want to see a video of the teardown along with some analysis, you scroll towards the end of this post. Continue reading ‘Wavetek 395 Arbitrary Waveform Generator Teardown’ »