Posts tagged ‘Power Supply’

Inside an Agilent 66312A Two-Quadrant Power Supply

Typically, a lab power supply can only operate within a single quadrant. Take a positive voltage power supply for example, it can only output or source current. If any attempt is made trying to sink current into the power supply by connecting a voltage source with a higher voltage than the output voltage of the power supply, the power supply would lose regulation since it cannot sink any current and thus is unable to bring down and regulate the voltage at its output terminals. Continue reading ‘Inside an Agilent 66312A Two-Quadrant Power Supply’ »

Bertan/Spellman 225-20R HV Power Supply Teardown

I just picked up another high voltage power supply, this time it is a working Bertan/Spellman 225-20R 20kV one. Unlike the Bertan 205A-05R that I did a teardown with last time which was entirely analog, this one can be controlled digitally either via the front panel or via GPIB from the back. In this blog post, let me share some of the teardown pictures with you. If you are interesting in seeing some cool experiments with this high voltage power supply, you can scroll down and watch my video towards the end. Continue reading ‘Bertan/Spellman 225-20R HV Power Supply Teardown’ »

Epson PowerLite 84 Multimedia Projector Teardown and Repair

I recently was given a broken Epson PowerLite 84 projector. The projector would not turn on when plugged in and there was no sign of life. So I decided to take a look at what was wrong with it. The potential reward is high since I do not have a projector yet and I could definitely use one for my home theater setup. A video of this teardown and repair is linked towards the end. Continue reading ‘Epson PowerLite 84 Multimedia Projector Teardown and Repair’ »