I did a detailed review and teardown of a DreamSourceLab‘s DSTouch DS4T1012, touchscreen operated handheld oscilloscope. You can check out the review video below. In this blogpost, we are going to examine some of the teardown pictures.
The FNIRSI DPOX180H is a digital phosphor dual channel handheld oscilloscope with a builtin function generator. It boasts a single channel bandwidth of 180 MHz. I was at first very skeptical of its bandwidth claim, but upon further verification, the…
A dedicated LCR meter is a luxury for many electronics hobbyists, but it is extremely useful when dealing with analog circuitry where the component values need to be known precisely under the given frequency conditions. I have an Agilent 1731B…
In a previous post, I did a teardown of a NanoVNA-F V2. This time let’s take a look at a LiteVNA vector network analyzer. One of the key differences between the LiteVNA and the NanoVNA-F V2 is that LiteVNA has…
I recently purchased a BSide ACM03 Plus clamp meter so that I could do some high current measurements for my tab welder project. This meter can be bought on eBay for around $25, which makes it one of the cheapest…
I picked up an autoranging True RMS multimeter from ennoLogic a couple of weeks ago. Before this purchase, I actually had never heard of ennoLogic. But the design and spec of the meter looked quite good and the selling price…
Last time I did a pretty thorough review of the X-TRONIC 4040 hot air rework/soldering station and shared my own experience with it. Overall, it is a very good entry level rework station. I have been using it intensely for…
I have used quite a few professional SMD rework stations before, but those professional grade ones tend to be quite pricey. So when I decided to get a hot air rework station for my own personal use, I settled on…