Archive for December 2013

A Digitally Controlled Dual Tracking Power Supply — III

In part 1 of this series of blog postings, I showed my preliminary design of a dual tracking linear power supply. In part 2, I showed the completed design and also the finished power supply circuits. And as promised last time, I have made a couple of videos showing the measurements of a few key parameters and will share the results here. Continue reading ‘A Digitally Controlled Dual Tracking Power Supply — III’ »

A Digitally Controlled Dual Tracking Power Supply — II

In my previous post, I showed my design of a dual tracking ±30V linear power supply. My goal was to use the transformer (28V+28V, center tapped) from an old Deltron W127G open-frame power supply and build a lab supply that can be digitally adjusted in both constant voltage and constant current modes. I also wanted each of the channels to be able to deliver up to 10 Amps of current so that I could fully utilize the 540VA transfomer from the W127G. Continue reading ‘A Digitally Controlled Dual Tracking Power Supply — II’ »