Posts tagged ‘SN754410’

How to Drive a Latching Relay

Latching relay (a.k.a. impulse relay) can be turned on and off by momentarily applying a voltage across the relay coil. The relay would maintain in its last switched state without the need to maintain the coil current. In this post, I will show a simple circuit which can be used to drive such relays. In the video towards the end, I also included more explanations and some demonstrations. Continue reading ‘How to Drive a Latching Relay’ »

A Self-Balancing Robot – III

In part one, I went over the theory behind the self-balancing robot and in part two, I showed you my build using a modified toy truck. In this post, I will walk you through the code and show you the finished balancing robot. If you are impatient, you can scroll to the end for the demostration video and the source code. Continue reading ‘A Self-Balancing Robot – III’ »

A Self-Balancing Robot – II

In my previous post, I explained the theory behind the self-balancing robot at a high level. Here, I will discuss the actual build in more details. Continue reading ‘A Self-Balancing Robot – II’ »

A Self-Balancing Robot – I

Building a self-balancing robot is one of those things that every hobbyist and engineer want to do. But there are a few hurdles for a lot of people. There is the theory on the one hand and then there is the mechanics on the other. In this and the next few posts, I will show you a self-balancing robot I recently built and will explain in details on some of the most important aspects. Continue reading ‘A Self-Balancing Robot – I’ »