Posts tagged ‘YIG’
I was going through some of the components I accumulated over the years and stumbled upon a Hewlett Packard YIG tuned oscillator (part number 5086-7023) that I bought a while back. This YIG oscillator was made for a frequency extension module for the HP 8660C synthesized signal generator and has a tunable range of between 2.7 to 4.2 GHz.
Continue reading ‘Powering Up an HP YIG Tuned Oscillator’ »I just picked up an HP 8620C sweep oscillator with an HP 86245A 5.9 GHz to 12.4 GHz RF plugin on eBay. This time around though, the unit does not work. While it was advertised as a working unit I could not get it powered on and there was no sign of life whatsoever. So before I start troubleshooting and repairing the unit, I thought I would do a quick teardown to see what’s inside and if I could spot anything obvious that was out of the ordinary. Continue reading ‘Capacitor Plague? Inside an HP 8620C Sweep Oscillator and HP 86245A RF Plugin’ »
I recently bought an HP 8671A microwave frequency synthesizer on eBay. This synthesizer can generate signals from 2GHz to 6.2GHz with an unleveled output of more than 8dBm. It is a nice complement to my HP 8642B signal generator and Wavetek 907 signal generator. Using these generators, I can now generate signals of pretty much any frequencies under the 12GHz range. A video of this teardown is linked towards the end of this post. Continue reading ‘Teardown of an HP 8671A Microwave Frequency Synthesizer’ »
As I mentioned in my previous posting, there was an issue with my Wavetek 907 microwave frequency generator. While everything was fine during my initial testing, the frequency display is now stuck with an out-of-range display and the adjustable frequency range is limited to between around 6.9 Ghz to 7.9 Ghz (instead of all the way up to 11 Ghz). My initial suspicion was that the PTC heater inside the YIG–Gunn oscillator was malfunctioning. But as it turned out, it was something else. Continue reading ‘Wavetek 907 Repair, YIG Oscillator Teardown’ »
Since I just got myself an HP 5350B microwave counter and I had fixed it up, I thought it would be great if I could get a SHF generator to test out the counter in the microwave range. So when I saw a super cheap Wavetek 907 for sale on eBay, I simply could not pass it up. Continue reading ‘Wavetek 907 Signal Generator Teardown’ »