2012 – Page 3 – Kerry D. Wong

Arduino Library For MCP342X

Last time, I discussed how to interface TI’s ADS1112 16-bit delta-sigma A/D converter with Arduino. Today I am going to […]

ADS1112 is a 16-bit delta-sigma A/D converter. This A/D chip has an I2C interface, a 2.048V internal voltage reference and […]

I was interviewed by EEWeb a few weeks ago, and the interview is featured in today’s Featured Engineer column. In […]

I got a used 250VA power transformer that was removed from equipment a couple of weeks ago. The transformer has […]

About a year ago, I wrote a simple library for interfacing AD7705/AD7706 with Arduino. The library works, but it requires […]

LTC6904 is a programmable oscillator which is capable of generating frequencies from 1kHz to 68MHz. The oscillation frequency can be […]

In this blog post, I will show you how to program an MSP430G2 series chip outside the MSP430 LaunchPad (MSP-EXP430G2) […]

In part one, I went over the theory behind the self-balancing robot and in part two, I showed you my […]

In my previous post, I explained the theory behind the self-balancing robot at a high level. Here, I will discuss […]

Building a self-balancing robot is one of those things that every hobbyist and engineer want to do. But there are […]

You probably know this already from just reading some of the posts in my blog. Like millions of others, I […]

I just started playing with TI’s MSP430 LaunchPad (MSP-EXP430G2) a few weeks ago and have found it surprisingly capable so […]

By default, ATmega328 used in Arduino (such as Uno or Duemilanove) operates under 5.0V. Sometimes though it is necessary to […]

MSP430 LaunchPad (MSP-EXP430G2) is compatible with many of the TI‘s Value Line series of microcontrollers. For these MCUs, both the […]

Since the current Arduino tools do not support in-circuit debugging, you will have to rely heavily on the serial print […]